您好,欢迎光临东莞市达昌机电有限公司!
网站公告:东莞市达昌机电有限公司

联系我们

东莞市达昌机电有限公司

联系人:吴小姐

电话:13922966037 

座机:0769-83334858
传真:0769-83334429
邮箱:dc2@dachangorg.com

地址:广东省东莞市常平镇常平广场三楼


智能卡互联设备
您当前的位置是:首页>>产品展示>>C&K>>智能卡互联设备

CCM03 Series

发布时间:2018-07-24 10:22:42  浏览次数:

CCM03 connectors have been developed to interface with SIM/SAM cards as defined by GSM11-11 and ENV1375-1. The connectors are available with either hinged covers or fixed covers and have been designed to minimize the amount of space needed for PCB mounting.

Features

  • Hinged Cover

  • Available with 6 or 8 contacts, with or without PCB locating pegs.

  • Available with insulated card presence switch.

  • The cover springs open when unlocked while the card is in place.

  • The molding is polarized so that the cover can only be closed if the card is correctly inserted.

  • The cover can be replaced without removing the connector from the PCB.

  • Inspection slots allow an electrical test to be made without opening the cover.

  • The overall height of the connector is only 2,5 mm. The amount of space needed to mount the connector is just 29,65 mm x 17,2 mm.

Fixed Cover

  • Available with 6 or 8 contacts.

  • The overall height of the connector is 2,85 mm max. Only 25,5 mm x 17,2 mm of board space is required to mount the connector.

General

  • With tape and reel packaging as standard, the connectors are designed to be automatically pick-and-placed.

  • The high temperature thermoplastic moldings are suited for infrared and convection soldering processes.

  • By using an inlay finish in the contact area the life of the precious metal is extended by over 10 times that of standard gold plating.

  • Robustly formed printed circuit tails allow a co-planarity of ± 0,05 mm to be maintained.

 

 

 

  1. Contacts Copper alloy

  2. Plating Contact area : Gold alloy inlay or gold over nickel

  3. Terminals : Tin lead (2µ min)

  4. Moldings High temp. thermoplastic UL 94V-0 rated

  5. Slide lock/metal cover Stainless steel

  6. Number of Contacts 6 or 8

  7. Mechanical life, hinged cover 10,000 cycles min

  8. Mechanical life, fixed cover 50,000 cycles

  9. Card insertion force Hinged cover: 1 N max Fixed cover: 3 N max

  10. Card extraction force Hinged cover: 1 N max Fixed cover: 0.80 N min / 3 N max

  11. Contact force 0.25 N min / 0.50 N max

  12. Slide locking force 2 N min / 6 N max

  13. Vibration Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity 1µs

  14. Shock Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs

  15. Insulation resistance 1,000 MΩ min

  16. Resistance 100 mΩ max

  17. Current rating 10 µA min / 1 A max

  18. Dielectric strength 750 Vrms min

  19. Card detection switch Normally open

  20. Contact resistance 100 mΩ max

  21. Dielectric strength 250 Vrms min

  22. Current rating 1 mA min / 10m A max

  23. Maximum power 0.2 VA

  24. Operating temperature -40°C to +85°C

  25. Soldering temperature Temperature/time profile acc. to CECC00802 para. 6.1, Fig. 3 with peak temperature 250°C

  26. Damp heat IEC 512 test number 11c (10 days)

  27. Salt mist IEC 512 test number 11f (96 hours)

 


上一条:CCM02 Series   下一条:CCM01 Series
网站首页  |  关于我们 |  新闻中心 |  产品展示 |  公司风采 |  荣誉证书 |  诚聘英才 |  在线留言 |  联系我们 
 
版权所有 ◎ 2018 东莞市达昌机电有限公司
电话:13926802013
网站备案号:粤ICP备18101131号
地址:广东省东莞市常平镇常平广场三楼